8、Snap the C-clip and Gasket on the tube. 9、Measure the distance from the fixture to the shut-off valve. 10、Cut the tubing with a standard tube cutter.

10.
Slide both nuts over the tubing and then snap the C-clip and place the Gasket at the opposite end.

 

11.Connect.

　　 12.No Special Tools Required!
　　　　No Sealants Necessary!
　　　　　Most Nuts Are Useable!

13. Application:
　　 faucet
　　 Toilet
　　 Dishwasher

14.Sizes & Specifications

Tube:3/8"nominal x 30' coil AISI 316L stainless steel (Fully bright annealed)

Gasket Kit*:Gasket-EPDM rubber C-clip-Polyacetal Nut-Nickel/Chrome plated Brass(Only for 3/8" compression)

* Available sizes:3/8" compression,1/2" compression,1/2" pipe thread,and 7/8" Ballcock

Operating Pressure:125 psi maximum

Operating Temp:40＜-180＜F

Code:IAPMO Listed.

(Documented as the first metallic,corrugated water connector for field fabrication.)

Conforms to NSF 61.

For use with water in exposed locations only.

All tubing is Leak Tested.

 
 
   
   
HOME Introduction PRODUCT FEEDBACK